The Stormchaser single speed frameset is designed from the ground-up to take on gravel rides in inclement weather. The lightweight aluminum frame features gravel race geometry similar to Warbird; Class 5 VRS to absorb road impacts. The all-new sliding Alternator Flat Mount dropouts make single speeding simple, and the included geared dropout plate adds 1x drivetrain compatibility; and extra tire clearance for managing mud. The carbon fibre fork is also prepared for anything abrasion plates prevent wear from mud-caked tires, Three-Pack mounts add extra storage for water or gear, and internal routing keeps your brake hose and dynamo cable out of the elements. The Stormchaser single speed gravel frameset is a stellar starting point for a bike that performs rain or shine.

Sizing:

• 49cm - 142cm–157cm
• 52.5cm - 155cm–165cm    
• 54.5cm - 162cm–173cm    
• 56cm - 170cm–180cm    
• 57.5cm - 178cm–188cm    
• 59cm - 185cm–193cm
• 61cm - 190cm–UP

Specifications:

• Wheel/Tire Sizes: 700c x 42 mm
• Alternate Wheel/Tire Sizes: 700c x 32–50 mm; 650b x 47–50 mm
• Suspension Fork Length (Travel): N/A
• Rigid Fork Length: 420 mm
• Fork Offset: 51 mm
• Headset Upper: IS41
• Headset Lower: IS52
• Seatpost: 27.2 mm
• Seatpost Collar: 32.0 mm
• Dropper Compatible (Routing): Yes (internal)
• Front Derailleur Clamp: N/A
• Front Derailleur Type: N/A
• Bottom Bracket: 73 mm BSA, threaded
• Crankset (Max Ring - Single Speed): 1x crankset, 40t max, Race Face/Easton 51 mm chainline, single speed only
• Crankset (Max Ring - Geared): 1x crankset only, 38t max, 49 mm MTN chainline, 168 Q-factor min.
• Front Brake (Rotor): Flat mount frame standard, 35 mm thickness, 42 mm bolt length (160 mm rotor only)
• Rear Brake (Rotor): Flat mount frame standard, 20 mm thickness, 27 mm bolt length (140–160 mm rotor)
• Rear Spacing: 12 x 142 mm TA
• Rear Axle Size: M12 x 167L, TP = 1.5, TL = 20 mm (NOTE, DOES NOT FIT SALSA DEABOLT W/ LEVER. DEADBOLT UL TOOLED AXLE ONLY)
• Derailleur Hanger: Hanger 465, QBP# FS2322 (Requires geared Alternator Flat Mount Plate, QBP# FS0719, and Hanger Axle/Stud Kit, QBP# FS1181)
• Rear Rack Mounts: Yes, universal rack rear compatible. Salsa Post-Lock seat collar required. Salsa Wanderlust Rack recommended.
• Fender Mounts: Yes, required fender hardware included.
• Max Tire Size with Fenders: 700c x 47 mm
• Water Bottle Mounts: Frames up to 56 cm: 2 in main triangle. Frames 57.5 cm and larger: 3 in main triangle.
• Downtube Accessory Mounts: One
• Top Tube Mounts: Yes, compatible with Salsa EXP Series Top Tube bag.
• Stem Clamp: 28.6 mm
• Crown Race: Integrated SHIS 40, 36° Angle
• Front Spacing: 12 x 100 mm TA
• Front Axle: M12 x 120L, TP = 1.5, TL = 12 mm
• Three-Pack Mounts: One mount per fork leg.
• Rack Mounts: 165 mm Low-rider compatible. Salsa Down Under rack recommended.